Voltage Regulating Solid State Relay
Product Overview
The Voltage Regulating Solid State Relay adjusts power delivered to a compatible single-phase AC load. The HXGT-1 regulating type is intended for applications that need more than simple full-on or full-off switching. It works as the power adjustment element in a control system, responding to the command input while the connected load receives the resulting AC output.
In a heating application, this can link a controller's demand to the electrical power supplied to the heater. Temperature sensing and feedback remain functions of the complete system unless included in the particular configuration. AC adjustment also affects the output waveform; it should not be understood as an arbitrary pure sine-wave supply. Resistive and inductive loads may respond differently. The specific model defines the command signal, operating range and regulation method. Its current duty and conduction losses establish the cooling needed around the unit during the process's normal operating cycle.
Features
Bolt Installation-Horizontal Type
Voltage-Regulating Single-Phase AC Solid-State Relay
Reverse-parallel Connection and Phase-Shifted Output of Bidirectional and Unidirectional Thyristor Chips
Optoelectronic devices Isolation
Zero crossing / Random Trigger Form
SMD mount technology
Built-in RC absorbing circuit
LED Status Indicator

Product Parameters
Electrical · Mechanical · Thermal
| Parameter | Value |
|---|---|
| Product model | HXGT-1/3840mA |
| Load current | 10A, 15A, 25A, 40A, 50A, 60A, 80A, 100A, 120A |
| Load voltage | 0-220VAC or 380VAC (Current-Mode Voltage Regulation) |
| Control voltage | Random type |
| Control current | DC4-20mA |
| On voltage | ≤1.5VAC |
| Off leakage current | ≤2mA |
| On-Off time | ≤10mS |
| Dielectric strength | 2500VAC Input-Output-Heat Sink |
| Insulation resistance | 1000MΩ/500VDC |
| Ambient temperature | -30-75°C |
| Mounting methods | Bolt-fastened |
| Work instructions | LED |
| Weight | 90g(10A, 25A) / 135g(above 40A) |
Typical Application
Where this module is used




Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: Can it replace an ordinary switching relay without changes?
A: Confirm the command signal, output method and load compatibility first; equal dimensions do not establish equivalence.
Q: Does it accept 0–10 V or 4–20 mA commands?
A: Verify the individual model specification. Neither signal format should be assumed from the category name.
Hot Tags: voltage regulating solid state relay, China voltage regulating solid state relay manufacturers, suppliers, factory, AC Single Phase SSR, DC Power Solid State Relay, Heavy Duty Solid State Relay, High Current SSR, Single Phase Solid State Relay, Three Phase Solid State Relay
Request a Quote
3 fields only
