Single Phase Solid State Relay
Product Overview
The Single Phase Solid State Relay is a contactless electronic switching device for industrial single-phase load control. It uses semiconductor chips to replace traditional mechanical contacts, delivering fast switching speed and no arc generation during operation. This relay supports control of resistive and inductive loads, and features compact construction with simple wiring for easy cabinet installation. Built-in overvoltage protection improves reliability against power grid fluctuations. It can cooperate with temperature controllers and PLCs, commonly used for heating control, lighting adjustment and small motor switching. As a maintenance-free switching solution, it performs steadily under frequent on-off cycles for long-term industrial automation applications.
Features
Bolt Installation-Horizontal Type Single phase AC Solid State Relay
One-way SCR chip antiparallel NO output
DC-AC DC Singnal control AC load /AC-AC AC Signal control AC load
Optoelectronic devices Isolation
Zero crossing / Random Trigger Form
SMD mount technology
Built-in RC absorbing circuit
LED Status Indicator
Product Parameters
Electrical · Mechanical · Thermal
| Parameter | Value |
|---|---|
| Product model | HXGT-1/ A |
| Control voltage | 3-32VDC |
| Control current | 6-25mA |
| Reverse voltage | 32VDC |
| Guarantee close voltage | 1VDC |
| Guarantee open voltage | 75-480VAC |
| Load voltage | 50A-200A |
| Load max current | 0.1A |
| Load mini current | ≤2VAC |
| Breakover voltage | ≤8mA |
| Output leakage current | ≥2500VAC |
| Medium withstand voltage | ≥100MΩ |
| Insulating resistance | ≤10mS |
| Switching time | 50-60Hz |
| Frequency range | -20-70°C |
| Operating temperature | 3VDC |
| Load current safety factor | resistive load 50-60%; inductive load 30-40% |
Typical Application
Where this module is used

Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: What loads can the Single Phase Solid State Relay control?
A: It mainly controls single-phase resistive loads, and also applies to some inductive loads with proper protection.
Q: What input control signals does it accept?
A: Standard DC input signal, widely matched with common industrial control output ports.
Q: Does solid state relay need a heat sink?
A: Yes. Heat sink installation is required when working under high current loads to avoid overheating.
Q: Can it replace traditional electromagnetic contactor?
A: It can replace contactors for frequent switching occasions, but not recommended for heavy short-circuit protection scenarios.
Q: What is the main difference between SSR and ordinary relay?
A: SSR has no mechanical contacts, longer service life and silent operation, while ordinary relays will produce arcs and wear over time.
Hot Tags: single phase solid state relay, China single phase solid state relay manufacturers, suppliers, factory, Heavy Duty Solid State Relay, High Power AC SSR, Single Phase Solid State Relay, solid state relays, Three Phase Power Relay, Voltage Control Solid State Relay
Request a Quote
3 fields only
