DC Solid State Relay

DC Solid State Relay
The DC Solid State Relay controls the current path to a suitable direct-current load. The HXGT-1 reference identifies the corresponding product series. It responds to a command at the control input and performs the power switching at the output, with each side having its own electrical requirements. Its output is intended for DC operation rather than relying on the periodic current zero found in an AC supply.
Send Inquiry

Product Overview

The DC Solid State Relay controls the current path to a suitable direct-current load. The HXGT-1 reference identifies the corresponding product series. It responds to a command at the control input and performs the power switching at the output, with each side having its own electrical requirements. Its output is intended for DC operation rather than relying on the periodic current zero found in an AC supply.

The load determines what happens during switching. A coil stores energy that must be handled when current is interrupted, while a capacitive load can draw a charging surge when energized. These events form part of the relay's duty alongside normal current. Output polarity, switching conditions and any built-in functions belong to the specific model. Heat from conduction also needs a path through the installation. This makes the relay a power switching element within the wider control circuit, not a substitute for the complete load-protection arrangement.

Features

Bolt Installation-Horizontal Type DC Solid State Relay

Patent design

IGBT/MOSFET NO output

DC-DC DC Singnal control DC load

Transformer Isolation

LED Status Indicator

product-560-469

 

Product Parameters

Electrical · Mechanical · Thermal

Parameter Value
Product model HXGT-1/220D40
Load current 10A, 25A, 40A, 60A, 80A, 100A
Load voltage 5-220VDC
Control voltage 3-32VDC
Control current DC5-25mA
On voltage ≤1.5V
Off leakage current ≤2mA
On-Off time ≤10mS
Dielectric strength ≥1500VAC Input-Output-Heat Sink
Insulation resistance 500MΩ/500VDC
Ambient temperature -30-75°C
Mounting methods Bolt-fastened
Work instructions LED
Weight 90g(10A, 25A) / 135g(above 40A)

 

 

Typical Application

Where this module is used

Battery Charge Discharge Control
Battery Charge Discharge Control
DC Solenoid Actuator Drive
DC Solenoid Actuator Drive
LED Lighting Switching Dimming
LED Lighting Switching Dimming
Small DC Motor Speed Control
Small DC Motor Speed Control

Customized 

Factory-direct flexibility

Marking
Your brand / part number
Electrical
Custom current / voltage ratings
Package
Packages includes: Standard Molded Case Panel-Mounted,
OEM
Private label production

Product Highlights

Electronic switching category for compatible DC output circuits.
Control input and load-side polarity can be checked independently.
Selection can reflect inductive or capacitive switching events.

FAQ

Common questions

Q: Can an AC output relay be used instead?

A: Not as a direct substitution. Select a product explicitly suitable for the required DC output conditions.

Q: Does a coil load need external suppression?

A: Evaluate its stored energy and the relay's actual built-in configuration; suitable external measures may be required.

 

Hot Tags: dc solid state relay, China dc solid state relay manufacturers, suppliers, factory, DC Power Solid State Relay, DC Switching Relay, High Power AC SSR, Single Phase SSR, solid state relays, Three Phase AC SSR

Request a Quote

3 fields only

Send Inquiry