AC Solid State Relay
Product Overview
The AC Solid State Relay switches a suitable alternating-current load using an electrical command from a controller. The HXGT-1 reference identifies the corresponding series. Its main job is straightforward: connect the load when commanded and stop conduction according to the output device's switching behaviour. The AC description refers to the load side, while the control input has its own signal requirements.
This separation allows the relay to act between a control circuit and a power circuit. A heater, transformer or motor can create different conditions when energized, even if their normal currents appear similar. The switching mode also matters: a zero-crossing version and another turn-on arrangement do not necessarily serve the same control task. Conduction produces heat that the mounting and cooling system must remove. The individual model defines these details, including the input, output and off-state characteristics. Basic load switching remains distinct from continuous voltage regulation.
Features
Bolt Installation-Horizontal Type Single phase AC Solid State Relay
One-way SCR chip antiparallel NO output
DC-AC DC Singnal control AC load
Optoelectronic devices Isolation
Zero crossing / Random Trigger Form
SMD mount technology
Built-in RC absorbing circuit
LED Status Indicator

Product Parameters
Electrical · Mechanical · Thermal
| Parameter | Value |
|---|---|
| Product model | HXGT-1/48D40A |
| Load current | 10A, 25A, 40A, 60A, 80A, 100A, 120A |
| Load voltage | 24-480VAC |
| Control voltage | 3-32VDC |
| Control current | DC6-15mA |
| On voltage | ≤1.3VAC |
| Off leakage current | ≤2mA |
| On-Off time | ≤10mS |
| Dielectric strength | ≥2500VAC Input-Output-Heat Sink |
| Insulation resistance | 1000MΩ/500VDC |
| Ambient temperature | -30-75°C |
| Mounting methods | Bolt-fastened |
| Work instructions | LED |
| Weight | 90g(10A, 25A) / 135g(above 40A) |
Typical Application
Where this module is used




Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: Does AC mean the control signal must also be AC?
A: Not necessarily. Confirm the control input specification separately from the load output.
Q: Are all models zero-crossing types?
A: No assumption should be made from the broad category; verify the switching mode of the selected model.
Hot Tags: ac solid state relay, China ac solid state relay manufacturers, suppliers, factory, AC Power Solid State Relay, AC Single Phase SSR, High Current SSR, Single Phase SSR, solid state relays, Voltage Control Solid State Relay
Request a Quote
3 fields only
