Single Phase Thyristor Trigger Module
Product Overview
The Single Phase Thyristor Trigger Module is a professional control unit designed for industrial power regulation and rectification systems. It provides independent and synchronous trigger signals for three single-phase thyristor circuits, perfectly meeting three-phase power control requirements. Built with optocoupler isolation and signal processing circuits, this module effectively suppresses on-site electromagnetic interference and ensures stable and consistent pulse output during long-term operation. With standard signal interface and simple wiring design, it can be easily connected with PLCs, temperature controllers and other industrial control equipment. Widely applied in industrial furnace temperature control, motor soft start and adjustable power supply equipment, it serves as a stable and cost-effective trigger solution for various thyristor-based power systems.
Performance Features
The trigger waveform has good symmetry, with a control accuracy of ≤5%, high linearity, and stable operation.
High trigger power, capable of directly triggering thyristors up to 3000A.
Multiple control signals: potentiometer (10K), DC 0~5V, DC 0~10V, and DC 4~20mA.
Innovative and unique design with no phase sequence restrictions, simple wiring, and easy maintenance.
The main circuit and control circuit are fully isolated, ensuring safety and reliability.
Coated with a three-proof varnish that forms a transparent protective layer, providing superior protection against moisture, dust, and corrosion.
The trigger is equipped with a function to block trigger pulses in the event of an incident or fault; for example, it blocks pulses when the
equipment is powered on, ensuring that the thyristors in the main circuit remain completely turned off.
Soft-start function (0~60s); must be specified at the time of order.
Trouble Removal
If the power indicator light is off, the power supply may not be connected.
If the power indicator light is on but the thyristor is not outputting, verify that both the load and the control signal are connected; both are required.
When an analog signal (0–5V, 0–10V, 4–20mA) is applied, the input indicator light turns on but the output cannot be adjusted. Check whether a load is connected; a load must be connected. (You can first use a 10K potentiometer for manual control and debugging, and connect a 100W~200W light bulb as the load for testing).
Typical Application
Where this module is used




Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: What devices can this trigger module drive?
A: It is specially designed to trigger single-phase thyristors and supports three-phase rectification, voltage regulation and soft-start systems.
Q: What control signals does the module support?
A: It accepts standard 0-10V voltage signal and 4-20mA current signal from mainstream industrial controllers.
Q: Does this module contain a main power circuit?
A: No, it only outputs trigger control signals and needs to work with external thyristor power modules.
Q: Can it work stably in high electromagnetic interference environments?
A: Yes. The opto-isolated structure effectively avoids signal distortion caused by field interference.
Q: Is it compatible with PLC automatic control systems?
A: Absolutely. It can be directly connected to PLC analog output ports for automatic power adjustment.
Hot Tags: single phase thyristor trigger module, China single phase thyristor trigger module manufacturers, suppliers, factory, Motor Reversing SSR, Single Phase Controlled Rectifier, Single Phase Power Regulator, Single Phase Thyristor Controller, Three Phase Motor Reversing Relay, Three Phase Thyristor Controller
Request a Quote
3 fields only
