Air cooled heat sink for thyristor module

Air cooled heat sink for thyristor module
The Air cooled heat sink for thyristor module provides an external cooling path for a compatible power module. Its mounting face receives heat from the module base, while the air-cooled structure transfers that heat to the surrounding airflow. The module's footprint and fixing pattern establish the physical interface, but the actual heat load determines the cooling duty.
Send Inquiry

Product Overview

The Air cooled heat sink for thyristor module provides an external cooling path for a compatible power module. Its mounting face receives heat from the module base, while the air-cooled structure transfers that heat to the surrounding airflow. The module's footprint and fixing pattern establish the physical interface, but the actual heat load determines the cooling duty.

Two modules with similar dimensions can generate different losses because their current and switching conditions differ. Contact area, interface material and fastening also affect the route the heat takes into the heatsink. Where several modules share one cooling body, their positions and spacing influence heat distribution. Air must reach the relevant surfaces and leave the enclosure rather than recirculate through a warm pocket. The product therefore works with the module mounting instructions and the cabinet airflow arrangement. An appropriate physical fit and a suitable thermal path are both part of the finished assembly.

Typical application

AC/DC motor control

Various of Rectifier supply, Industrial heating control

Light change, No-contact switching, Soft startup of motor

Quiescent reactive compensation, Welding machine, Transducer

UPS power supply, Charging and discharging of battery

Product Parameters

Electrical · Mechanical · Thermal

(G-22) D Series Section Steel Heatsink (G-22)

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

Figure Number G-22

Module

93.3

2540

25.2

260

product-176-91

247=13×19

 

 N Series Section Steel Heatsink (G-25)

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

Figure Number G-25

Module

77.78

2302

21

product-106-107125

80

 

H Series Section Steel Heatsink (G-26)

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

Figure Number G-26

Module

59.3

3080

16

product-181-79300

270=27×10

 

DXC-417-4 Heatsink (G-28)

Surface dimension

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

product-170-100Figure Number G-28

Ø51

Ø34~Ø50

35.9

1513

9.7

45

Application: This product applies to 600~1200A element assembling, and inverse parallel, series connection power sets, wind speed ≥4m/sec

 

DXC-418-4 Heatsink (G-29)

Surface dimension

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

product-170-113Figure Number G-29

Ø54

Ø34~Ø50

31

1190

8.4

57

Application: This product applies to 600~1200A element assembling, and inverse parallel, series connection power sets, wind speed ≥4m/sec

 

DXC-417 Heatsink (G-30)

Surface dimension

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

product-170-106Figure Number G-30

Ø56

Ø34~Ø55

62.13

2170

14.4

60

Application: This product applies to 600~1200A element assembling, and inverse parallel,series connection power sets, wind speed ≥4m/sec

 

DXC-684 Heatsink (G-31)

Surface dimension

Applicable device

Sectional area(cm2)

Perimeter(mm)

Weight(kg/m)

product-175-99Figure Number G-31

Ø35

Ø19~Ø34

29.53

1090

8

30

Application: This product applies to 600~1200A element assembling, and inverse parallel,series connection power sets, wind speed ≥4m/sec

 

 

Product Views & Dimensions

Illustration only

img
img
img
img
img
img
img
img
 
 

Typical Application

Where this module is used

AC DC Motor Control
AC DC Motor Control
Battery Charge Discharge
Battery Charge Discharge
Industrial Heating Control
Industrial Heating Control
Static Reactive Compensation
Static Reactive Compensation

Customized 

Factory-direct flexibility

Marking
Your brand / part number
Electrical
Custom current / voltage ratings
Package
Packages includes: standard package.
OEM
Private label production

Product Highlights

Mounting-face matching for compatible power module packages.
Losses and enclosure airflow guide the cooling assessment.
Shared installations can be reviewed for spacing and heat distribution.

FAQ

Common questions

Q: Does an identical hole spacing prove suitability?

A: No. Contact area, thermal duty, mounting condition and airflow also need to be checked.

Q: Can several modules share one heatsink?

A: That requires an assessment of space, individual losses, heat distribution and each module's installation requirements.

 

Hot Tags: air cooled heat sink for thyristor module, China air cooled heat sink for thyristor module manufacturers, suppliers, factory, IGBT Heat Sink, Module Cooling Heat Sink, Rectifier Air Cooled Heatsink, Semiconductor Air Cooled Heatsink, SS Series Water Cooled Heat Sink For Capsule Thyristor, SS2X Series Water Cooled Heat Sink For Capsule Thyristor

Request a Quote

3 fields only

Send Inquiry