Disc Type Thyristor
Product Overview
A gate signal starts conduction in the Disc Type Thyristor, allowing it to control when current begins flowing through a suitable power circuit. This is the basis of its use in controlled rectification and related AC power applications. The disc-shaped package fits pressure-mounted stacks, with the main contacts and cooling arrangement built around the body. The trigger wiring remains separate from the main current connections.
Unlike an uncontrolled diode, the device works with a trigger circuit to influence the power delivered to the load. Once conducting, an ordinary thyristor needs the circuit current to fall sufficiently and recovery conditions to be met before it blocks again. Removing the gate signal alone does not switch it off. The required model depends on the load current, blocking voltage and gate drive, while its dimensions and clamping requirements determine how it fits the equipment's existing power stack.
Feature
Full diffusion process, capsule type ceramic package
Amplifying gates
Double sided cooling
Product Parameters
Electrical · Mechanical · Thermal
|
Type |
Vdrm Vrrm |
It(av) Ths 55°C |
Itsm 10ms |
dv/dt |
di/dt |
Idrm Irrm |
Igt |
Vgt |
Ih |
Vtm/Itm |
Rth(j-hs) |
Tjm |
M2 |
Outline |
|
25°C |
||||||||||||||
|
V |
A |
KA |
V/μS |
A/μS |
mA |
mA |
V |
mA |
V/A |
°C/W |
°C |
KN |
||
|
KP100A |
100-6500 |
100 |
2.5 |
300 |
100 |
30 |
35-250 |
0.8-2.0 |
20-150 |
2.4/600 |
0.065 |
125 |
5.3-10 |
A-1,7 |
|
KP200A |
100-6500 |
200 |
2.5 |
300 |
100 |
30 |
35-250 |
0.8-2.0 |
20-150 |
2.4/600 |
0.065 |
125 |
5.3-10 |
A-2,8,12,15 |
|
KP300A |
100-6500 |
300 |
3.8 |
500 |
100 |
30 |
35-250 |
0.8-2.5 |
20-200 |
2.2/900 |
0.055 |
125 |
5.3-10 |
A-3,9,16 |
|
KP400A |
100-6500 |
400 |
5 |
500 |
100 |
40 |
35-250 |
0.8-2.5 |
20-200 |
2.4/1200 |
0.040 |
125 |
10-20 |
A-4,10,13,17,18 |
|
KP500A |
100-6500 |
500 |
6.4 |
800 |
100 |
50 |
35-250 |
0.8-2.5 |
20-250 |
2.4/1500 |
0.035 |
125 |
15-20 |
A-4,10,13,17,18 |
|
KP600A |
100-6500 |
600 |
6.4 |
800 |
100 |
40 |
35-300 |
0.8-2.5 |
20-250 |
1.8/1800 |
0.035 |
125 |
10-20 |
A-5,19 |
|
KP800A |
100-6500 |
800 |
10 |
1000 |
100 |
50 |
40-300 |
0.8-3.0 |
20-250 |
2.2/2400 |
0.032 |
125 |
15-20 |
A-5,19 |
|
KP1000A |
100-6500 |
1000 |
13 |
1000 |
150 |
80 |
40-300 |
0.8-3.0 |
20-300 |
2.4/3000 |
0.022 |
125 |
21-30 |
A-6,11,14,20 |
|
KP1200A |
100-6500 |
1200 |
15 |
1000 |
200 |
120 |
40-300 |
0.8-3.0 |
20-300 |
2.4/3000 |
0.020 |
125 |
21-30 |
A-20,21 |
|
KP1500A |
100-6500 |
1500 |
20 |
1000 |
200 |
120 |
40-300 |
0.8-3.0 |
20-300 |
2.4/3000 |
0.017 |
125 |
27-34 |
A-20,21 |
|
KP1800A |
100-6500 |
1800 |
22.5 |
1000 |
200 |
160 |
40-300 |
0.8-3.0 |
20-300 |
2.4/4000 |
0.016 |
125 |
30-40 |
A-22,23,24,25 |
|
KP2000A |
100-6500 |
2000 |
25 |
1000 |
250 |
200 |
40-300 |
0.8-3.0 |
20-300 |
2.4/4000 |
0.011 |
125 |
35-47 |
A-22,23,24,25 |
|
KP2500A |
100-6500 |
2500 |
31 |
1000 |
250 |
200 |
40-300 |
0.8-3.0 |
20-300 |
2.4/5000 |
0.011 |
125 |
35-47 |
A-22,23,24,25 |
|
KP3000A |
100-6500 |
3000 |
38 |
1000 |
250 |
200 |
40-300 |
0.8-3.0 |
20-300 |
2.2/5000 |
0.011 |
125 |
35-47 |
A-22,23,24,25 |
|
KP3500A |
100-6500 |
3500 |
44 |
1000 |
250 |
250 |
40-300 |
0.8-3.0 |
20-300 |
2.4/5000 |
0.01 |
125 |
70-85 |
A-22,23,24,25 |
|
KP4000A |
100-6500 |
4000 |
44 |
1000 |
250 |
250 |
40-300 |
0.8-3.0 |
20-300 |
2.4/5000 |
0.01 |
125 |
70-85 |
A-22,23,24,25 |
|
KP5000A |
100-6500 |
5000 |
44 |
1000 |
250 |
250 |
40-300 |
0.8-3.0 |
20-300 |
2.4/5000 |
0.01 |
125 |
70-85 |
A-22,23,24,25 |
Note:
IGT, VGT, Ih are test values under 25°C. Unless otherwise specified, other parameters in the parameter table are test values under Tjm.
I2t=I2tsm×tw/2: tw=bottom width of half-sinusoid current. Under 50Hz, I2t=0.005I2 tsm(A2S).
When working under the current of 60Hz: Itsm(8.3ms)=Itsm(10ms) ×1.066, Tj=Tjm. I2t(8.3ms)=I2t(10ms) ×0.943, Tj=Tjm.
Gate lead: white or colorless, cathode lead (if necessary): redProduct Views & Dimensions
Illustration only
Drop In Cross-reference
Replacement table
|
Original Part |
Brand |
Type |
Our Replacement |
|
ТБ123 / ТБ133 / ТБ143 / ТБ153 / ТБ173, ТБ300–2000А |
Russian (GOST) |
Fast thyristor, capsule, 300–2000 A, 400–3000 V |
TB123 / TB133 / TB143 / TB153 / TB173, TB300–2000A |
|
ТС123 / ТС133 / ТС143 / ТС153, ТС200–1000А |
Russian (GOST) |
Triac, capsule, 200–1000 A, 400–3000 V |
TC123 / TC133 / TC143 / TC153, TC200–1000A |
|
Т123-200/250/320 · Т133-400/500/630 · Т143-630/800/1000 · Т153-1000/1250/1600 |
Russian (GOST) |
Phase control thyristor, capsule, 400–3000 V |
T123-200/250/320 · T133-400/500/630 · T143-630/800/1000 · T153-1000/1250/1600 |
|
Д123-200/320/400 · Д133-500/630/800 · Д143-630/800/1000 · Д153-1000/1250/1600 |
Russian (GOST) |
Rectifier diode, capsule, 400–3000 V |
D123-200/320/400 · D133-500/630/800 · D143-630/800/1000 · D153-1000/1250/1600 |
|
1000-1500A E8(K-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST1000C, ST1200C, ST1500C |
|
500-800A E5 (B-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST500C,ST600C,ST800C |
|
400-600A E3 size |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST400,ST500,ST600 |
|
300-600A E2(E-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST300C,ST400C,ST500C |
|
200-400A E1(A-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST200C,ST300C,ST400C |
|
1000-1500A E8(K-puk) |
Rectifier Diode Capsule Version |
SD1000 1200 1500 |
|
|
600-1000A E5 size(B-puk) |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD600,SD800 |
|
600-700A E3 size |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD500,SD600 |
|
400-600A E2 size (E-puk) |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD400, SD500, SD600 |
|
200-500A E1 size |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD200, SD300, SD400 |
Typical Application
Where this module is used




Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: Does removing the gate signal turn the device off?
A: An ordinary thyristor generally needs the circuit current and recovery conditions to permit turn-off; removing the trigger alone is not sufficient.
Q: Can it directly replace an uncontrolled diode?
A: Provide the original marking, dimensions, polarity, operating voltage and current, load duty and cooling arrangement.
Hot Tags: disc type thyristor, China disc type thyristor manufacturers, suppliers, factory, Disc Type Avalanche Rectifier Diode, Disc Type Fast Thyristor, disc type power semiconductors, High Voltage Avalanche Diode, Russian Thyristor, Welding Diode
Request a Quote
3 fields only



