Disc Type High Frequency Thyristor
Product Overview
Short operating cycles give a thyristor less time to recover before the next switching event. The Disc Type High Frequency Thyristor addresses this requirement in compatible power conversion circuits. Its role is to provide triggered conduction where turn-off recovery must fit the timing of the circuit. The disc body is installed within a pressure-mounted power assembly, with the gate connection supporting the external firing arrangement.
The usable frequency depends on the model and the conditions around it. Current waveform, temperature and the available recovery interval all contribute; a frequency label by itself cannot describe the complete operating range. Light load and startup may also differ from normal production duty. This makes the device's dynamic data as relevant as its current and voltage ratings. For equipment built around an existing disc stack, the contact dimensions, polarity and cooling arrangement complete the physical match alongside the trigger and commutation requirements.
Feature
Full diffusion process, Distributed extension to amplify the gate structure
Low switching loss, Excellent dynamic characteristic
Excellent high frequency performances, applicable frequency 2.5-10KHz
Capsule type ceramic package, Double-sided cooling
Typical application
Inverter, Electric welder
Chopper, Inductor
Various types of forced converter
Product Parameters
Electrical · Mechanical · Thermal
|
Type |
Vdrm Vrrm |
It(av) |
Itf/f |
Tq 100°C |
Itsm 10ms |
dv/dt |
di/dt |
Idrm Irrm |
Igt |
Vgt |
Ih |
Vtm/Itm |
Rth (j-hs) |
Tjm |
M2 |
Outline |
|
Ths 55°C |
25°C |
|||||||||||||||
|
V |
A |
A/KHz |
μS |
KA |
V/μS |
A/μS |
mA |
mA |
V |
mA |
V/A |
°C/W |
°C |
KN |
||
|
KG200A |
800-2500 |
200 |
200/6 |
10-16 |
2.4 |
500 |
200 |
30 |
30-200 |
0.8-2.5 |
20-250 |
3.2/600 |
0.055 |
115 |
5.3-10 |
A-2,8,12,15 |
|
KG300A |
800-2500 |
300 |
300/6 |
10-16 |
3.6 |
500 |
200 |
40 |
30-250 |
0.8-3.0 |
20-400 |
3.2/900 |
0.035 |
115 |
10-20 |
A-3,9,16 |
|
KG400A |
800-2500 |
400 |
300/10 |
8-10 |
4.8 |
700 |
40 |
30-250 |
0.8-3.0 |
20-400 |
3.2/1200 |
0.035 |
115 |
10-20 |
A-4,10,13,17,18 |
|
|
KG500A |
800-2500 |
500 |
500/6 |
10-16 |
6 |
700 |
200 |
50 |
30-250 |
0.8-3.0 |
20-400 |
3.2/1500 |
0.032 |
115 |
15-20 |
A-4,10,13,17,18 |
|
KG600A |
800-2500 |
600 |
600/6 |
12-18 |
7.2 |
700 |
250 |
60 |
30-250 |
0.8-3.0 |
20-400 |
3.2/1800 |
0.030 |
115 |
18-25 |
A-5,19 |
|
KG800A |
800-2500 |
800 |
800/6 |
12-18 |
9.6 |
1000 |
250 |
80 |
30-250 |
0.8-3.0 |
20-400 |
3.2/2400 |
0.024 |
115 |
19-25 |
A-5,19 |
|
KG1000A |
800-2500 |
1000 |
1000/6 |
12-18 |
12 |
1000 |
250 |
100 |
30-300 |
0.8-3.0 |
20-400 |
3.2/3000 |
0.022 |
115 |
21-30 |
A-6,11,14,20 |
|
KG1200A |
800-2500 |
1200 |
800/8 |
8-15 |
14 |
1000 |
250 |
100 |
30-300 |
0.8-3.0 |
20-400 |
3.2/3000 |
0.022 |
115 |
21-30 |
A-20,21,22 |
Note:
IGT, VGT, Ih are test values under 25°C. Unless otherwise specified, other parameters in the parameter table are test values under Tjm.
I2t=I2tsm×tw/2: tw=bottom width of half-sinusoid current. Under 50Hz, I2t=0.005I2 tsm(A2S).
When working under the current of 60Hz: Itsm(8.3ms)=Itsm(10ms) ×1.066, Tj=Tjm. I2t(8.3ms)=I2t(10ms) ×0.943, Tj=Tjm.
Gate lead: white or colorless, cathode lead (if necessary): red
Product Views & Dimensions
Illustration only
Drop In Cross-reference
Replacement table
|
Original Part |
Brand |
Type |
Our Replacement |
|
ТБ123 / ТБ133 / ТБ143 / ТБ153 / ТБ173, ТБ300–2000А |
Russian (GOST) |
Fast thyristor, capsule, 300–2000 A, 400–3000 V |
TB123 / TB133 / TB143 / TB153 / TB173, TB300–2000A |
|
ТС123 / ТС133 / ТС143 / ТС153, ТС200–1000А |
Russian (GOST) |
Triac, capsule, 200–1000 A, 400–3000 V |
TC123 / TC133 / TC143 / TC153, TC200–1000A |
|
Т123-200/250/320 · Т133-400/500/630 · Т143-630/800/1000 · Т153-1000/1250/1600 |
Russian (GOST) |
Phase control thyristor, capsule, 400–3000 V |
T123-200/250/320 · T133-400/500/630 · T143-630/800/1000 · T153-1000/1250/1600 |
|
Д123-200/320/400 · Д133-500/630/800 · Д143-630/800/1000 · Д153-1000/1250/1600 |
Russian (GOST) |
Rectifier diode, capsule, 400–3000 V |
D123-200/320/400 · D133-500/630/800 · D143-630/800/1000 · D153-1000/1250/1600 |
|
1000-1500A E8(K-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST1000C, ST1200C, ST1500C |
|
500-800A E5 (B-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST500C,ST600C,ST800C |
|
400-600A E3 size |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST400,ST500,ST600 |
|
300-600A E2(E-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST300C,ST400C,ST500C |
|
200-400A E1(A-puk) |
Infineon,IR/Vishay |
Thyristor(SCR) Capsule Version |
ST200C,ST300C,ST400C |
|
1000-1500A E8(K-puk) |
Rectifier Diode Capsule Version |
SD1000 1200 1500 |
|
|
600-1000A E5 size(B-puk) |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD600,SD800 |
|
600-700A E3 size |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD500,SD600 |
|
400-600A E2 size (E-puk) |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD400, SD500, SD600 |
|
200-500A E1 size |
Infineon,IR/Vishay |
Rectifier Diode Capsule Version |
SD200, SD300, SD400 |
Typical Application
Where this module is used




Customized
Factory-direct flexibility
Product Highlights
FAQ
Common questions
Q: Does the name establish a fixed operating frequency?
A: No. The model data and the circuit's commutation, load and temperature conditions determine the usable range.
Q: Is it automatically interchangeable with a fast thyristor?
A: No. Compare dynamic characteristics, gate requirements and physical interfaces before assessing interchangeability.
Hot Tags: disc type high frequency thyristor, China disc type high frequency thyristor manufacturers, suppliers, factory, AC Control Thyristor, Disc Type Avalanche Rectifier Diode, Disc Type Thyristor, Frequency Converter Thyristor, Russian Standard Thyristor, Welding Diode
Request a Quote
3 fields only



